DTF Sample Pack – Press Test Ready
- In-house production
- Test printed before production
- Calibrated for consistency
- Built for real press environments
Description
What the Sample Pack Is
The sample pack is a set of production DTF transfers used to evaluate print quality and press behavior on your own equipment. These are not demo prints or low-quality test pieces. They are produced with the same calibrated settings and the same in-house process as every order that ships from ArmyTransfers.
Use the sample pack to verify ink coverage, peel behavior, adhesion strength, and color output before placing your first gang sheet or single transfer order.
What You're Evaluating
- Print quality. Clean edges, fine detail reproduction, controlled white balance.
- Peel behavior. Hot peel film. Confirm performance on your specific garment and press setup.
- Adhesion. Press at the recommended settings and evaluate bond strength and wash performance.
- Color. Evaluate color output on your equipment. Results reflect our calibrated settings applied to your pressing conditions.
Note: results vary based on press temperature accuracy, pressure, and fabric type. Testing on the materials you press regularly gives you the most useful evaluation.
Who Should Order This
- Decorators evaluating a new transfer supplier before switching
- New customers verifying quality before a first bulk order
- Apparel sellers adding DTF to their workflow who want to confirm results before going live with clients
- Operators who changed garment brands and want to re-verify press behavior
If you already have an established pressing workflow with ArmyTransfers, the sample pack is less relevant than a small single transfer order to verify a new material.
After You Test
If the sample pack meets your standards, the next step is your first gang sheet or single transfer order. Production-ready files move fastest through the queue.
Important Notes
Production time begins after the order is placed and processed. This is a real production order, not instant fulfillment. Transit time varies by carrier. Local pickup available in Gilroy and San Jose, CA.
Pressing instructions
DTF Pressing Instructions
Equipment: Heat press recommended.
- Pre-press garment: 5–10 seconds to remove moisture and flatten fibers.
- Set press: 300–320°F (149–160°C). Medium to firm pressure.
- Press transfer: 10–15 seconds.
- Peel: Follow the film’s behavior.
— Hot peel: Peel immediately while hot.
— Cold peel: Let it cool fully, then peel. - Finish press (recommended): Cover with parchment or a finishing sheet.
Press 5–10 seconds. Improves durability and reduces edge lift.
Notes for clean results
- Use a smooth platen and even pressure across the image.
- Avoid steam. Moisture kills adhesion.
- Textured garments may need slightly more pressure or a longer finish press.
If you see issues
- Edges lifting: More pressure, add finish press, or increase time slightly.
- Poor adhesion: Increase pressure, confirm temp accuracy, and pre-press longer.
- Scorching/dye migration: Lower temp, shorten time, use a protective cover sheet.
Built for real press conditions. Process-first. No shortcuts.
Delivery
Order Delivery
- Production starts after artwork approval. Files must be production-ready to enter the queue.
- New or unverified artwork may require a test print. This can extend turnaround time.
- Turnaround time is production-dependent. Volume, artwork, and approval status all affect timing.
- Orders placed before the daily cutoff are queued for the next available production window.
- Orders placed after the cutoff roll into the following production day.
- Shipping time begins after production is complete. Transit time is carrier-dependent.
- Local pickup is available. Pickup details are confirmed after order approval and final inspection.
Production-ready files move faster. Test printing ensures consistent results.
Secure Checkout with
