DTF Gang Sheets – Production-Ready Transfers
- In-house production
- Test printed before production
- Calibrated for consistency
- Built for real press environments
Overview
DTF gang sheets are the most cost-efficient way to produce multiple designs in a single order. Upload your artwork, fill the sheet, and cut your cost per print. Sizes range from 22"×24" to 22"×300", so you can order for a small client job or a large seasonal run.
Every sheet is printed in-house at our Gilroy, CA facility. New artwork is test printed before bulk production begins. Settings are calibrated for consistent ink coverage, clean edges, and reliable peel behavior.
Whether you're pressing a handful of custom garments for a client or running a full seasonal drop, the process is the same: upload, review, produce, ship.
Sheet Sizes and Use Cases
| Size | Good For |
|---|---|
| 22" × 24" (2 ft) | Small runs, 4–8 designs, custom client orders |
| 22" × 60" (5 ft) | Mid-volume, Etsy shops, brand drops |
| 22" × 84" (7 ft) | Growing operations, recurring seasonal orders |
| 22" × 120" (10 ft) | High-repeat designs, uniform accounts |
| 22" × 180" (15 ft) | Full-scale production runs |
| 22" × 240" (20 ft) | High-volume decorator output |
| 22" × 300" (25 ft) | Maximum sheet, full production volume |
What's in Every Sheet
- Printed in-house using calibrated production settings
- Test printed on new artwork before bulk production begins
- Controlled ink laydown, white balance, and cure profile
- Clean edges and fine detail retention
- Hot peel film, packaged to protect adhesive and print surface in transit
Who Orders Gang Sheets
Gang sheets fit any decorator who has more than one design to press. This includes:
- Apparel sellers fulfilling multiple client designs per order
- Etsy shop operators building seasonal and custom inventory
- Small brand operators running drops
- Uniform customizers with recurring multi-logo jobs
- Anyone pressing custom garments who wants to reduce cost per print
If you're pressing a single design for one client, the single transfer page is a better fit.
Pressing instructions
DTF Pressing Instructions
Equipment: Heat press recommended.
- Pre-press garment: 5–10 seconds to remove moisture and flatten fibers.
- Set press: 300–320°F (149–160°C). Medium to firm pressure.
- Press transfer: 10–15 seconds.
- Peel: Follow the film’s behavior.
— Hot peel: Peel immediately while hot.
— Cold peel: Let it cool fully, then peel. - Finish press (recommended): Cover with parchment or a finishing sheet.
Press 5–10 seconds. Improves durability and reduces edge lift.
Notes for clean results
- Use a smooth platen and even pressure across the image.
- Avoid steam. Moisture kills adhesion.
- Textured garments may need slightly more pressure or a longer finish press.
If you see issues
- Edges lifting: More pressure, add finish press, or increase time slightly.
- Poor adhesion: Increase pressure, confirm temp accuracy, and pre-press longer.
- Scorching/dye migration: Lower temp, shorten time, use a protective cover sheet.
Built for real press conditions. Process-first. No shortcuts.
Delivery
Order Delivery
- Production starts after artwork approval. Files must be production-ready to enter the queue.
- New or unverified artwork may require a test print. This can extend turnaround time.
- Turnaround time is production-dependent. Volume, artwork, and approval status all affect timing.
- Orders placed before the daily cutoff are queued for the next available production window.
- Orders placed after the cutoff roll into the following production day.
- Shipping time begins after production is complete. Transit time is carrier-dependent.
- Local pickup is available. Pickup details are confirmed after order approval and final inspection.
Production-ready files move faster. Test printing ensures consistent results.
Secure Checkout with
