Pressing instructions polyester

Pressing DTF Transfers on 100% Polyester

Polyester requires lower temperatures and lighter pressure to avoid heat damage or dye migration. Follow the guide below for clean, lasting transfers on polyester fabrics.

Step-by-Step Instructions

1. Pre-Press

  • Temp: 285–290°F

  • Time: 5 seconds

  • Pressure: Light to medium

2. First Press (Apply Transfer)

  • Temp: 285–290°F

  • Time: 10–12 seconds

  • Pressure: Light to medium

3. Cool Down

  • Let the garment cool completely before peeling the film (cold peel)

4. Final Press (Seal Press)

  • Temp: 285–290°F

  • Time: 10 seconds

  • Pressure: Light

  • Use parchment paper or a finishing sheet.

Pro Tips

  • Test fabrics with sublimation or dye migration risks.

  • Press at the lower end of the temp range to prevent ghosting.

  • Use a teflon pillow for uneven surfaces or seams.